business and permissions inquires bodgitandleggit@gmail.comIf you want any of the tools I'm using the videos here are the Facebook links send them a message Step 1 – Disconnect your fuel rail. The most common ways of doing this involve either loosening clamps, pulling them off with a screwdriver, or pressing down on clips. Step 2 – If your vehicle has a fuel regulator pressure line then disconnect the vacuum line from it by pulling it away gently. Pull and keep pulled the engine shut down valve. This will prevent diesel from going to the fuel injection pump. Not sure how you stop you engine, but you want to pull (and keep pulling) what ever you normally pull on to stop the engine. 3.Now turn the engine over for 15 seconds with the electric starter. This is the start of the Yanmar 2GM diesel engine troubleshooting. In this video we go in detail on how to remove the injectors and look at the spray pattern To replace the fuel injector seals, you need to remove the fuel injectors from the engine. This may require disconnecting some wires, hoses, or clips. You should also relieve the pressure from the fuel system before removing the injectors. Once you have removed the injectors, you can pull off the old seals with a pair of pliers or a screwdriver. Here we are removing a stuck injector for one of our customers, Yodel, London.Modern day injectors, regardless of shape or size, may get easily stuck and har In this video I share a simple tip on how to remove stubborn or stuck fuel injectors, This method can be applied to various other jobs on cars but I have use Removing injectors on a Direct-Injection Diesel engine will always have the potential to ruin your plans - I anticipated this one well in advance, and had to m3wIcu.

how to remove a diesel fuel injector